H08CrMoVA for pipeline welding

Short Description:

Product Detail

Product Tags

Product Parameters

  • Detail

Used in welding 12CrMoV, 15Cr1MoV, ZG20CrMoV and so on,
a typical heat-resistant steel pressure vessels for pipeline welding. Reheat steam turbine for heat pipe segment, low-pass pipeline.

Conform with:
1-H10MnSi(EM13K) use for low carbon steel and low alloy steel welded structure

chemical composition of welding wire(%) C Mn Si P S Cr Ni Mo V Cu
≤0.10 0.40~0.70 0.15~0.35 ≤0.030 ≤0.030 1.00~1.30 ≤0.30 0.50~0.70 0.15~0.35 ≤0.20
Properties or Deposited Metal
Yield strengthσ0.2(Mpa) Tensile strengthσb(Mpa) Elongationδ5(%) AKV impact(J)
≥275 450~585 ≥22 -
Wire Size(mm) φ2.0 φ3.0 φ4.0 φ5.0
Please be noted Welding position
Wire shall be stocked in dry.open the packs just when welding to avoid the wire rust.

Before welding please clean out the oil,rust,water etc from the work parts src=

About US

Since the establishment of the factory, we have continuously pursued better product quality and service, and have been recognized and praised by companies such as HYUNDAI, GOLD, BESTWEL, WELDFAST ITCE, SINO-AMERICA, etc. Hope you can become our next loyal partner.


Raw Materials


Quality control



1kg D100

  • Previous:
  • Next: